Shopping cart

View your shopping cart.

Official PayPal Seal

MailChimp Sign-Up Form

See what's happening on our social media sites

   
   

TOOLS

DRILL BITS OPTION C: LONG DRILL BIT STARTER KIT (3 LONG DRILL BITS AND 4 RODS) -- 7 PIECE BARGAIN KIT

$26.00
DRILL BITS OPTION C: LONG DRILL BIT STARTER KIT (3 LONG DRILL BITS AND 4 RODS) -

LONG DRILL BIT STARTER KIT (3 LONG DRILL BITS AND FOUR 24" RODS -- TWO 2.5mm x 24" and Two 3mm x 24" that can be sharpened to a chisel tip at the end, by sanding, and used as "drill rods.")

Save some money. These rods are just a sharp but are made from less strong steel, so they will not last through as many drill cycles as the more expensive kits. Still, these will work, espeicially if you just want to drill one or two planes. A nice inexpensive alternative!

 

 

 

 

 

 

$26.00

BEACON ADHESIVE'S FOAM TAC FOAM FINISH (8 oz) Finishing Compound

$10.25
BEACON ADHESIVE'S FOAM TAC FOAM FINISH (8 oz) Finishing Compound

BEACON AQDHESIVE'S FOAM TAC FOAM FINISH (8 oz) Finishing Compound

Another AWESOME product from Beacon Adhesives.  

• Repairs dents & nicks in all foam including Depron, EPP, EPO, Styrofoam & more!

• Easy to apply; cleans up with water

• Helps make foam stronger without extra weight

• Creates a smooth surface for decals or paint

 

FEATURED IN THIS VIDEO:

 

$10.25

HDPE Plastic sheets 1/64" thick HALF SHEET - 12" x 20"

$2.25

Our 1/64" thick HDPE is available in 2 sizes and in a variety of colors:

WHOLE SHEETS (CLICK HERE) are 20" x 24" and are $3.80 each.

HALF SHEETS (THIS PAGE)   are 12" x 20"  and are $2.25 each.

$2.25

HDPE Plastic sheets 1/64" thick WHOLE SHEET - 20" x 24"

$3.80

Our 1/64" thick HDPE is available in 2 sizes and in a variety of colors:

WHOLE SHEETS (THIS PAGE) are 20" x 24" and are $3.80 each.

HALF SHEETS (CLICK HERE)   are 10" x 24"  and are $2.25 each.

$3.80

SCOTCH HEAVY DUTY SHIPPING TAPE (48mm X 20.3m/1.88" x 800" -- 22.2 yds)

$3.99
SCOTCH HEAVY DUTY SHIPPING TAPE (48mm X 20.3m/1.88" x 800" -- 22.2 yds)
SCOTCH HEAVY DUTY SHIPPING TAPE (48mm X 20.3m/1.88" x 800" -- 22.2 yds)

We tested a whole bunch of tapes and this was the best for strength and stickiness. We use this to strengthen and reinforce the leading edge on foamie wings. See how in this video:

 

 

 

$3.99

Cyanoacrylate 1oz Insta-Flex Flexible Thin CA Glue

$15.98

Insta-Flex Flexible Thin CA 1. oz

$15.98

DISCOUNT - KITS AND BITS DISCOUNT* - Discount on bits when you order one or more kits (scroll to the bottom for info)

$16.00
Extra Long Drill Bits

GET AN EVEN BIGGER DISCOUNT ON BITS
BY COMBINING THEM WITH CRASHPROOFING KITS!

You start with what you need for the 800mm FMS series (1 - 5/64" x 6" and 1 - 1/8" x 12" bit)

$16.00

CARBON FIBER: 4mm x 24" Carbon Fiber Tube (4mm outer diameter, 2mm inner diameter)

$2.93

4mm x 24" Carbon Fiber Tube. In large photo pictured third from left.

$2.93

DRILL BITS: 12" Long X 1/8" DRILL BIT

$7.90
Long Drill Bits

1/8" X 12" LONG DRILL BIT. Prep your own foam planes for Killer Planes' Crashproofing with these handy drill bits. When you receive your order and you discover there is no Pepsi along with it, please don't call us. The can is just for size reference.

$7.90

MEDIUM GRIT SANDING SPONGES

$2.75
MEDIUM GRIT SANDING SPONGES

MEDIUM GRIT - flexible foam is coated wtih an aluminum oxide abrasive to sand contours without altering the shape of the item being sanded.

• Reusable, washable, and excellent sanding performance

• Uses include wood, metal, auto body, foam

• Can be used wet or dry

$2.75

DRILL BITS OPTION B: LONG DRILL BIT STARTER KIT 2 (6 LONG DRILL BITS) -- SAVE 7%

$61.50
Long Drill Bits

This kit has all the bits in the "DRILL BIT STARTER KIT",  with a 3/32" x 18"  bit added on. You still save 10% on all of them! Here's the list of the bits in this kit:

 

LONG DRILL BIT STARTER KIT 2 (6 LONG DRILL BITS)  -- SAVE 10%

Includes one of each:

• 1/16" x 6"

• 5/64" x 6"

• 7/64" x 6"

• 7/64" x 12"

• 3/32" x 18"

• 3/16" x 24"

And the order does not include:

$61.50

30 Minute Slow-Cure Epoxy (2 bottles, 9 oz each)

$11.50
30 Minute Slow Cure Epoxy

30 Minute Slow-Cure Epoxy, (2 bottles, 9 oz. each)

$11.50

15 Minute Mid-Cure Epoxy (2 bottles, 9 oz each)

$11.50
15 Minute Mid-Cure Epoxy (2 bottles, 9 oz each)

15 Minute Mid-Cure Epoxy (2 bottles , 9 oz each)

$11.50

Gorilla Glue 4 oz

$9.00
Gorilla Glue 4 oz

Gorilla Glue 4 oz

$9.00

THREAD LOCKER TL-242 (2 oz)

$3.95
THREAD LOCKER TL-242 (2 oz)

THREAD LOCKER TL-242 (2 oz)

 

Technical Specs:

Viscosity (pa.s)                             1200

Maximum gap fill (mm)                  0.13

Destructive moment (N.m)               12

Average tear down moment (N.m)    4

$3.95

Inexpensive Tool Kit for keeping in your vehicle

$18.95
Inexpensive Tool Kit for keeping in your vehicle

Pick up one of these handy, inexpensive tool kits and throw it in your vehicle for last minute tweaks and repairs on the field.

$18.95

GLUE: Fast Setting 5 min Epoxy (1 oz)

$5.50
Fast Setting 5 min Epoxy (1 oz)

Fast Setting 5 min Epoxy (1 oz).  Mix for 30 seconds. 1 minute working time. Sets in about 5 minutes. Cures in about 10 minutes. Full cure 1 hour.

 

Specs.

Bond strength - 3000 lbs

Set time - 5 minutes

Color - clear

Hardness - Flexible

Waterproof - Yes

Flammable - No

Temp Range - 30 degrees F - 250 degrees F

 

$5.50

Lipo Cell Checker/Battery tester

$3.50
Lipo battery tester

This handy little, portable gadget can tell you the levels in each cell and the overall total voltage of your battery.  Our own team uses this device to test batteries before we send them out to you!

$3.50

DRILL BITS OPTION A: LONG DRILL BIT STARTER KIT (5 LONG DRILL BITS) -- SAVE 7%

$46.85
LONG DRILL BIT STARTER KIT
LONG DRILL BIT STARTER KIT

LONG DRILL BIT STARTER KIT (5 LONG DRILL BITS)  -- SAVE 7%

Includes one of each:

• 1/16" x 6" drill bit

• 5/64" x 6" drill bit

• 7/64" x 6" drill bit

• 7/64" x 12" long drill bit

• 3/16" x 24" long drill bit

And the order does not include:

• One can of Pepsi.

 

The can is just for size reference, and we're giving them a free plug. I understand a beer can is about the same size...you may need to check the scale.

$46.85

DRILL BITS: 18" long X 3/32" DRILL BIT

$17.60
3/32" X 18" LONG DRILL BIT
3/32" X 18" LONG DRILL BIT

3/32" X 18" LONG DRILL BIT. Prep your own foam planes for Killer Planes' Crashproofing with these handy drill bits. When you receive your order and you discover there is no Pepsi along with it, please don't call us. The can is just for size reference.

$17.60

GLUE: Gorilla Glue (2 fl oz)

$6.25
Gorilla Glue (2 fl oz)

Gorilla Glue (2 fl oz) a MUST HAVE for installing Killer Planes' Crashproofing. (Sorry bonus super glue offer has ended)

$6.25

GLUE: Mini traveling glue gun & 5 sticks of glue

$3.75
Mini traveling glue gun & 5 sticks of glue

Throw this mini traveling glue gun and the spare 5 sticks of glue into your traveling tool kit for quick, on-the-field repairs.

$3.75

GLUE: Cyanoacrylate Glue (CA Glue) - 2 oz

$3.49
Cyanoacrylate Glue (CA Glue) - 2 oz

CyanoAcrylate Glue (CA Glue) 2 oz.  Another one of the top glues we use to install our Killer Planes' Crashproofing Kits. Mulitple uses! Mixed at 95% concentration and with a shelf life of 1 year. 15 second dry time. *Not foam safe.

 

$3.49

Contact Cement - 30 g

$2.75
Contact Cement - 30 g

Contact Cement, one of the glues we use to install our Killer Planes' Crashproofing kits as well as mutiple other uses in the shop.

$2.75

Wire cutters - 4 1/2" Diagonal Cutting Plier

$3.75
Wire cutters - 4 1/2" Diagonal Cutting Plier

4 1/2" Diagonal Cutting Plier, Tempered Alloy Steeel, durable matte grip, heat treated cutting edge.

$3.75

KNIVES & SAWS: Foam Cutting Knife With Breakaway Blade Tips

$4.50
Utility knife

This is an indespensible tool for several hobby projects! We use this for all our general foam cutting- it's the best knife because you can extend a new blade enough to cut through a 3" piece of foam with one pass. I keep one with a new blade handy at all times!

$4.50

Needle Nose Pliers - 7" or 4 1/2" (sold separately)

$3.75
Needle Nose Pliers - 7" or 4 1/2" (sold separately)

Large 7" or Small 4 1/2" ($7.50 for the set or $3.75 ea). Create your own inexpensive tool kit to keep in your vehicle and have "on hand" at the field.

$3.75

KNIVES & SAWS: Mini Hack Saw

$3.00
Mini Hack Saw

Mini Hack Saw for cutting foam and other small projects.

$3.00

GLUE: Professional Welder Glue

$5.00
PROFESSIONAL WELDER GLUE

PROFESSIONAL WELDER GLUE (1 tube). Industrial strength contact adhesive. "Permanently seals, bonds and repairs." is what they say. "GREAT STUFF!" is what I say- this is the glue that i use to repair torn foam hinges on EPO foam, and even to make new hinges on EPO, like when cutting flaps into a wing. It's also a great "small part" contact adhesive, when you don't feel like using a brush.

$5.00

KNIVES & SAWS: FOAM CUTTING KNIFE

$2.00
FOAM CUTTING KNIFE

It's your own mini foam cutting heat saw. Don’t use your wife or mom's good steak knives to stain with flame and cut your foam. Keep on her good side by purchasing this inexpensive knife and you won't even have to wash it afterwards! 

We use this knife by heating it in a torch (or stove burner) to slice through foam in hard to reach places (like battery compartments).

For general foam cutting without heat, use the other knife with retractable blades- it is THE best all around foam cutting knife, period!

$2.00