JURRASIC WORLD RAPTOR
Here is Freewing's gorgeous rendition of the United State's Air Force F-22 Raptor. This speed demon has an upgraded, high performance 2836-3500KV motor, a 40A ESC and runs off a 4-cell Lipo. She is very scale and detailed with her US Air Force sky-camo grahics, a hand painted pilot, detailed cockpit and steerable nose gear. Freewing has beefed this Raptor up by creating a modular joiner system for strength and ease in swapping part -- couple that with SuperMax Reinforcement from Killer Planes and that's ONE TOUGH BIRD. All of the electronics are pre-installed for more speedy "out of the box" flight times. And did we mention the 64mm EDFs? Whoa mama! Sends chills down our spine. Let's get zipping around that sky!
NOTE: Steve thinks that Freewing planes are GORGEOUS, but that a number of them are unnecessarily weak in some important structural areas. Although we only offer these with reinforcement anyway, we highly recommend that you reinforce your Freewing planes!
What is Foam Prep? Click here.
What is Crashproofing or Reinforcement? Click Here
MORE QUESTIONS? Click here
Watch the Freewing F-22 Raptor with Steve's custom paint job fly here:
SPECIFICATIONS:
Wingspan |
690mm / 27.2in |
Length |
950mm / 37.4in |
Flying Weight |
850g / 29.98oz |
Power System |
2836-3500Kv |
Speed Control |
40A, T Connector, internal SBEC |
Propeller / EDF |
64mm EDF |
Servos |
9g x 5 |
Landing Gear |
Fixed main landing gear, steerable nose gear. |
Required Battery |
4S 14.8V 1600mAh to 2200Ah 30C LiPo |
Required Radio |
4 Channel computer radio |
Rudder |
No |
Flaps |
No |
Ailerons |
Yes |
Lights |
No |
Hinge Type |
Nylon hinges on all control surfaces |
Material |
EPO Foam |