GO NUTS
10 screws, glue the wing tip Vortex generator. Put it together and get flippy. the MXS is a high-lift 3D plane for doing the type drunken plane maneuvers that Steve enjoy. We actually advise some good ole' Crashproofing to help her hold together even better. Crank up the 35-36 1250kv Outrunner motor, test the 40A ESC and 4 meta gear digital servos. This model has the wonderful precision ball links and rods that everyone loves. The MXS was designed and built for performance. It's got extra long servo arms to improve hovering and wing tip Side Force Generators for enhanced low speed flying. Rugged yet light weight aluminum landing gear, super strong laminated control surface hinges, and an ultra visable yellow and black paint scheme top off this beauty.
CHECK OUT HOW A BEGINNER 3D FLYER HANDLES THE MXS HERE:
SPECIFICATIONS
Manufacturer | RocHobby |
---|---|
Wingspan | 1100mm /43.3in |
Overall Length | 1080mm /42.5in |
Flying Weight | 1100g /38.8oz |
Motor Size | Brushless 3536-KV1250 |
ESC | 40A |
Servo | 9g digital metal gear x 4 |
Radio | 4 Channel |
CG (center of gravity) | 85-90mm (From Leading Edge) |
Prop Size | 11*5.5, 2 blade propeller |
Recommended Battery | Li-Po 11.1V 2200mAh 35C |
Aileron | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Retracts | No |
Approx. Flying Duration | 5min |
Minimum Age Recommendation | 14+ |
Experience Level | Intermediate |
Recommended Environment | Outdoor |
Assembly Time | 45 minutes |
Is Assembly Required | Yes |
Material | Durable EPO |
Package Options | PNP |
Requires | PNP Requires Radio System, Battery and Charger |